Brands

Information

Email Signup



Join our mailing list!
Home > Connectivity > Enclosures and Racks > Cabinets and Racks
Sort By:
Page of 1
Wavenet VWMB-4U-SW 4U Depthless Horizontal & Vertical Wall Mount Bracket - Black Wavenet 10SSV-S2PK 2U 10" Vented Bottom Single Sided Rack Shelf - 2 Pack - Black
Wavenet VWMB-4U-SW 4U Depthless Horizontal & Vertical Wall Mount Bracket

This wall mount bracket is perfect for equipment that requires deep mounting depth. The bracket can be mounted horizontally or vertically on walls or flat surfaces. Bracket is also made with two large opening holes and side cable anchor tie points to secure cable bundles.

Features:
  • Depthless designed, compatible with 19" wide equipment
  • Supports horizontal and vertical mounting
  • Pass-through openings for cable entry and exit
  • Integrated with cable and Velcro tie-down slots
  • EIA/ECA-310-E (Revision of EIA-310-D) compliant
  • Up to 150 lbs. load capacity
Standards & Compliance:
  • EIA/ECA-310-E
  • RoHS
Package Includes:
  • 4U Depthless Horizontal & Vertical Wall Mount Bracket, 1 pc.
  • Including Mounting Hardware
 		Wavenet 10SSV-S2PK 2U 10" Vented Bottom Single Sided Rack Shelf - 2 Pack

These shelves let you optimize your working space by giving you the ability to mount equipment to your rack instead of taking up desk or floor space. The vented bottom shelf plate ensures consistant airflow to encourage safety, proper air circulation, and lower temperatures while maintaining structural integrity. You can install the 2U rack shelf in your rack at any height, giving you a stable surface for placing equipment that's un-mountable or storing your tools, to keep them readily accessible.

Features:
  • 2U vented bottom, Single-Sided 10" deep
  • Packaged in 2-Pack saves space and is good for shipping
  • Compatible with standard 19 inch wide equipment, and 19 inch racks
  • Rack shelf for supporting objects up to 50 Lbs.
  • Used with 2-Post, 4-Post Racks, cabinets and wall racks
  • Made from 16 gauge cold roll steel (CRS)
  • Black powder coat finish
Standards & Compliance:
  • RoHS
  • EIA/ECA-310-E
Package Includes:
  • 2U 10" Vented Bottom, Single-Sided Rack Shelf (1) 2-Pack
  • #12-24 Mounting Screw, 16 pcs.
Wavenet 15SSV-S2PK 3U 15" Vented Bottom Single Sided Rack Shelf - 2 Pack Wavenet WMR-8U 18" Depth Open Frame Wall Rack
Wavenet 15SSV-S2PK 3U 15" Vented Bottom Single Sided Rack Shelf - 2 Pack

These shelves let you optimize your working space by giving you the ability to mount equipment to your rack instead of taking up desk or floor space. The vented bottom shelf plate ensures consistant airflow to encourage safety, proper air circulation, and lower temperatures while maintaining structural integrity. You can install the 3U rack shelf in your rack at any height, giving you a stable surface for placing equipment that's un-mountable or storing your tools, to keep them readily accessible.

Features:
  • 3U vented bottom, single-sided 15" deep
  • Packaged in 2-Packs; saving space and good for shipping
  • Compatible with standard 19 inch wide equipment
  • Rack shelf for supporting objects up to 50 lbs.
  • Compatible with standard 18 inch racks
  • Used with 2-post, 4-post racks, cabinets and wall racks
  • Made from 16 gauge cold rolled steel (CRS)
  • Black powder coat finish
Standards & Compliance:
  • RoHS
  • EIA/ECA-310-E
Package Includes:
  • 3U 15" Vented Bottom, Single-Sided Rack Shelf, (1) 2-Pack
  • #12-24 Mounting Screws, 16 pcs.
 		Wavenet WMR-8U 18" Depth Open Frame Wall Rack

The ideal solution for network cabling installations in the intermediate distribution frame (IDF) areas and can be used as an alternative to expensive floor 2-post or 4-post racks and cabinets.

Features:
  • 19" wide with #12-24 threaded EIA hole pattern
  • 18" depth, number markings on rail
  • 12-24 tapped rails and 19" wide EIA compliant
  • Supports up to 150 lbs.
  • Suitable for wall mount or floor restricted areas
  • Two-piece design with cable tie points slots
  • Measures 19.6"W x 17.8"H x 18.0"D
  • EIA/ECA-310-E
  • RoHS Compliant
Package Includes:
  • Top Support Panel, 1 pc.
  • Bottom Support Panel, 1 pc.
  • Vertical Rail, 2 pc.
  • Mounting Hardware & Installation Instructions
Wavenet WMR-15U 18" 15U Depth Open Frame Wall Rack Wavenet WMR-30U 18" Depth Open Frame Wall Rack - Black
Wavenet WMR-15U 18" 15U Depth Open Frame Wall Rack

The ideal solution for network cabling installations in the intermediate distribution frame (IDF) areas and can be used as an alternative to expensive floor 2-post or 4-post racks and cabinets.

Features:
  • 19" wide with #12-24 threaded EIA hole pattern
  • 18" depth, number markings on rail
  • 12-24 tapped rails and 19" wide EIA compliant
  • Supports up to 150 lbs.
  • Suitable for wall mount or floor restricted areas
  • Two-piece design with cable tie points slots
  • Measures 19.6"W x 30.0"H x 18.0"D
  • EIA/ECA-310-E
  • RoHS compliant
Package Includes:
  • Top Support Panel, 1 pc.
  • Bottom Support Panel, 1 pc.
  • Vertical Rail, 2 pc.
  • Mounting hardware & installation instructions
 		Wavenet WMR-30U 18" Depth Open Frame Wall Rack

The ideal solution for network cabling installations in the intermediate distribution frame (IDF) areas and can be used as an alternative to expensive floor 2-post or 4-post racks and cabinets.

  • 19" wide with #12-24 threaded EIA hole pattern
  • 18" depth, number marking on rail
  • 12-24 tapped rails and 19" wide EIA compliant
  • Supports up to 150 lbs.
  • Suitable for wall mount or floor restricted areas
  • Two-piece design with cable tie point slots
  • Measures 19.6"W x 54.4"H x 18.0"D
Package Includes:
  • Top Support Panel, 1 pc.
  • Bottom Support Panel, 1 pc.
  • Vertical Rail, 2 pcs.
  • Mounting Hardware & Installation Instructions
Wavenet CBTF-WM6U Double Section Swing Out 6U Wall Mount Cabinet Wavenet 2POST-45U-N 45U 2 Post Open Frame Rack - Black
Wavenet CBTF-WM6U Double Section Swing Out 6U Wall Mount Cabinet

Suitable for intermediate distribution frame (IDF) locations such as server room audio/video/security applications, wiring, closets, manufacturing areas, warehouses, or anywhere where remote networking equipment needs to be protected and stored.

  • Cable entry and exit on top and bottom knockouts
  • Lockable front, rear doors and side panels
  • Reversible right or left handed front door
  • Integrated with ground point for maximum protection
  • Number markings on rails with adjustable depth
  • Made with tempered glass shatter resistance front door
  • (1) 68CFM fan with one extra slot for additional fan
  • 24" depth, useable is 18", (2 sets) of 16" on center mount
  • Ships fully assembled to save time
  • 90 lbs. load capacity when properly secured
Standards & Compliance:
  • ANSI/EIA 310-D
  • IEC60297-2, DIN41194 Part 1, DIN41494; Part 7
  • RoHS
Package Includes:
  • Double Section Swing Out 9U Wall Mount Cabinet, 1 pc.
  • Mounting Hardware, 1-pack with 2 Keys
 		Compatible with all industry standard 19" wide mounting equipment. The rack provides unrestricted airflow for maximum ventilation and provides easy access to cables for moves, adds, and changes.
Wavenet CBTF-WM9U Double Section Swing Out 9U Wall Mount Cabinet Wavenet VCMC-41278D Double Sided 78" Vertical Plastic Duct Cable Manager - Black
Wavenet CBTF-WM9U Double Section Swing Out 9U Wall Mount Cabinet

Suitable for intermediate distribution frame (IDF) locations such as server room audio/video/security applications, wiring closets, manufacturing areas, warehouses, or anywhere where remote networking equipment needs to be protected and stored.

  • Cable entry and exit on top and bottom knockouts
  • Lockable front, rear doors and side panels
  • Reversible right or left handed front door
  • Integrated with ground point for maximum protection
  • Number markings on rails with adjustable depth
  • Made with tempered glass shatter resistance front door
  • (1) 68CFM fan with one extra slot for additional fan
  • 24" depth, useable is 18", (2 sets) of 16" on center mount
  • Ships fully assembled to save time
  • 90 lbs. load capacity when properly secured
Standards & Compliance:
  • ANSI/EIA 310-D
  • IEC60297-2, DIN41194 Part 1, DIN41494; Part 7
  • RoHS
Package Includes:
  • Double Section Swing Out 9U Wall Mount Cabinet, 1 pc.
  • Mounting Hardware, 1-Pack with 2 Keys
 		Wavenet VCMC-41278D Double Sided 78" Vertical Plastic Duct Cable Manager

The VCMC vertical cable manager is an ideal solution for managing cabling on the front and back of 4-Post 45U racks. 78" and double-sided for maximum cable convealment, route wires through the front or back finger ducts for more capacity. Promote passive cooling by routing wires away from your equiptment using the management duct with a cover that keeps your server room looking organized.

  • Double-Sided - 4.3"W X 11.6"D X 78"H, with hinged covers
  • Large front and rear openings dual hinged covers
  • Smooth rear oval holes for easy front-to-back cable routing
  • Flexible fingers ensure proper cable bend radius
  • Compatible with 2-Post or 4-Post 45U racks
  • Three sectional dual hinged covers for easy cable access
Standard & Compliance
  • EIA/ECA-310-E
  • RoHS
Includes:
  • Double-Sided 78" Vertical Plastic Duct Cable Manager, 1 pc.
  • Hinged Covers, 3 pcs.
  • Mounting Bracket, 4 pcs.
  • Mounting hardware included
Wavenet 4POST-45U 45U 4 Post Open Frame Rack - Black
Wavenet 4POST-45U 45U 4 Post Open Frame Rack

Compatible with all industry standards 19" wide mounting equipment. This 45U adjustable mounting depth measures from 22" to 40" and is ideal for small-to-medium sized installations. The rack provides unrestricted airflow for maximum ventillation and provides easy access to cables for moves, adds, and changes.

Features:
  • Adjustable mounting depth 22" to 40"
  • Includes 3" wide 28 pieces plastic cable management rings
  • Easy assembly: one type screw connection design
  • Loading Capacity: Max. static load up to 800 lbs.
  • Open frame design with unrestricted airflow
  • #12-24 threaded mounting holes on rails
  • Heavy-duty cold rolled steel construction
  • Self-squaring design with bottom anchoring holes
Standards & Compliance:
  • EIA/ECA-310-E
  • IEC 60297-3-100
  • RoHS
Package Includes:
  • Left Vertical Rail, 2 pcs.
  • Right Vertical Rail, 2 pcs.
  • Base Bracket, 2 pcs.
  • Bottom Corner Section, 2 pcs.
  • Bottom Center Section, 2 pcs.
  • Top Left Corner Section, 2 pcs.
  • Top Right Corner Section, 2 pcs.
  • Top Center Section, 2 pcs.
  • Top Bracket, 2 pcs.
  • M8 Bolt: 36 pcs / M8 Wrench: 1 pc
  • #12-24x5/8" Phillips Screws
  • Cable Managment Hook: 28 pcs.