ADC-VDB770 Video Doorbell Trim Mounting Wall Plate
Video Doorbell Mounting Wall
Plate (ADC-VDBA-WP) that is installed between the ADC-VDB770 and the
wall. Mounting wall screws and anchors (the same type as what is included with
the ADC-VDB770) are also included with each unit.
The mounting wall plate is designed to cover up existing
holes or missing paint due to a previous doorbell that would not be covered by
the footprint of the ADC-VDB770 itself. The mounting plate is wide enough
to cover the width of a Skybell HD Wi-Fi Doorbell Camera so that any missing
paint or screw holes will be covered.
**Black in color
Dimensions
Installation
Place the mounting plate against the mounting surface, and
then do either of the following:
Thread the mounting screws through the mounting bracket and
outer (highest and lowest) holes on the wall plate.
Thread the mounting screws through the back plate and
inner holes on the wall plate.
Exclusively for systems powered by Alarm.com