|
|
|
|
|
|
|
|
|
|
|
10 Ohm 10W Resistor
|
Alarm.com VDB750 Backplate Adapter ADC-VDBA-750-BPA
Exclusively for systems powered by Alarm.com
|
Alarm.com VDB750 Wedge Mount Kit ADC-VDBA-750-WMK
Exclusively for systems powered by Alarm.com
|
|
|
|
|
|
|
|
|
|
|
|
|
alarm.com ADC-VDBA-TC temperature collar for the VDB770 The ADC-VDBA-TC temperature collar is designed to be used in
cold environments
Alarm.com Video Doorbell Temperature Collar for
the ADC-VDB770
Exclusively for systems powered by Alarm.com
|
Alarm.com Video Doorbell Touchless Cover for the VDB770
Exclusively for systems powered by Alarm.com
|
SkyBell Mounting Bracket for Slim Trim Line Video Doorbell Camera (Replacement)
|
|
|
|
|
|
|
|
|
|
|
|
|
Mounting Bracket & Screws for HD Doorbell
Camera (Replacement)
|
SkyBell HD Wedge Mounting Plate ADC-VACC-DB-WMProvides up to 15-20% more viewing angle in any direction.
Compatible with the provided SkyBell wall mount.- Dimensions: 3" W x
0.65" H. Also includes the door frame adapter.
|
Trim Slim Wedge Mounting Plate For SkyBell
Provides up to 15-20% more viewing angle in any direction.
Compatible with the provided SkyBell wall mount.
Dimensions: 1.44" x 4.8" x 0.65" (W x H x D)
Note: wedge made by QS llc for the ADC slim doorbell
|
|
|
|
|
|
|
|
|
|
|
|
|
ADC-VDB770 Video Doorbell Trim Mounting Wall Plate Video Doorbell Mounting Wall
Plate (ADC-VDBA-WP) that is installed between the ADC-VDB770 and the
wall. Mounting wall screws and anchors (the same type as what is included with
the ADC-VDB770) are also included with each unit.
The mounting wall plate is designed to cover up existing
holes or missing paint due to a previous doorbell that would not be covered by
the footprint of the ADC-VDB770 itself. The mounting plate is wide enough
to cover the width of a Skybell HD Wi-Fi Doorbell Camera so that any missing
paint or screw holes will be covered.
**Black in color
Dimensions
Installation
Place the mounting plate against the mounting surface, and
then do either of the following:
Thread the mounting screws through the mounting bracket and
outer (highest and lowest) holes on the wall plate.
Thread the mounting screws through the back plate and
inner holes on the wall plate.
Exclusively for systems powered by Alarm.com
|
Alarm.com Video Doorbell Power Module ADC-VDBA-PM-770 The power module distributes power from the transformer
and is required to be used with every ADC-VDB770 installation.
A power module is included with each ADC-VDB770. Additional
power modules can be purchased separately. Power module purpose - Designed for the ADC-VDB770.
- Enables installers to retrofit existing 10VA
(volt-amp) transformers and avoid the need for replacement by
allocating all the available power from the transformer to the ADC-VDB770. The
additional power allows the ADC-VDB770 to support Video Analytics.
- Blocks electrical currents from running through the chime
when the button is not pressed. Doing so prevents humming at the chime.
- Ensures that digital chimes can ring properly.
Exclusively for systems powered by Alarm.com
|
Alarm.com Video Doorbell Power Module ADC-VDBA-PM-770 The power module distributes power from the transformer
and is required to be used with every ADC-VDB770 installation.
A power module is included with each ADC-VDB770. Additional
power modules can be purchased separately. Power module purpose - Designed for the ADC-VDB770.
- Enables installers to retrofit existing 10VA
(volt-amp) transformers and avoid the need for replacement by
allocating all the available power from the transformer to the ADC-VDB770. The
additional power allows the ADC-VDB770 to support Video Analytics.
- Blocks electrical currents from running through the chime
when the button is not pressed. Doing so prevents humming at the chime.
- Ensures that digital chimes can ring properly.
Exclusively for systems powered by Alarm.com
|
|
|
|
|
|
|
|
|
|
|
|
|
SkyBell Digital Doorbell Adapter ADC-VACC-D-AThe adapter will make your digital door chime compatible
with SkyBell.Installation is easy and takes only 5 minutes.- Includes: digital door chime adapter x1
|
Alarm.com Video Doorbell Wall Power Supply Kit The Video Doorbell Wall Power Supply Kit (ADC-VDBA-PSU-PD) is a DC plug-in power supply rated at 16V, 1.25A(20W). The Video Doorbell Wall Power Supply Kit is designed to easily power the ADC-VDB770 when not using an existing chime circuit. This supply can be used for installations where there is no existing wiring or where the existing setup is incompatible.
Important: The Wall Power Supply Kit should only be installed when no wired chime is used in the circuit.
Installation and wiring Required materials
- A 10 W / 10 Ohm resistor (or flameproof 5W / 3.9 Ohm resistor without a power module)
- Wires for the power supply
Exclusively for systems powered by Alarm.com
|
ADC-W115C Alarm.com Smart Chime (WiFi Extender) The ADC-W115C Smart Chime serves as a Wi-Fi extender and
customizable wireless doorbell chime. Add the Alarm.com Smart Chime to an
account when an in-home chime is not a feasible option during a doorbell camera
installation. Simply pair the ADC W115C with the existing router, add to an
account, add a doorbell camera, and enjoy boosted network signals that provide
instantaneous chime notifications.
Features:
- MT7620DA processor with 32MB Flash and 64MB RAM
- Extend WiFi Range
- Smart LED Indicators
- Two External Antennas
- WPS Function
- Easy to Install
- Compact Design
|
|
|
|
|
|
|
|
|
|
|
|
|
ADC-VDB770-WB with White Button Wi-Fi Next-Generation Video Doorbell Camera The Video
Doorbell with White Button, works best for doors with direct sunlight exposure IMPORTANT NOTE: Alarm.com Products are Not Standalone Devices. They requires a service subscription from an Authorized Alarm.com Dealer in order to work on a network.
The ADC-VDB770-WB, Alarm.com's next-generation video doorbell
camera and the latest installment in the Design Studio Series product
line, has an expansive 150° vertical Field of View (FOV), allowing you to
monitor the entire doorway area. Two-Way Audio and full portrait viewing in the
app make it easier than ever to see a speak with visitors. Plus,
the ADC-VDB770 uses video analytics to minimize false-positive motion
detection and to enable rapid detection of people, so you receive
alerts even if visitors don't ring the bell.
Requirements:REQUIRES ALARM.COM SUBSCRIPTION
Features:
- Expansive FOV (150° V, 115° H)
- Full HD (1440 x 1920) video resolution
- High dynamic range (HDR)
- IR night vision
- Video Analytics on the edge for faster, more relevant alerts
- Live video and saved clip viewing
- Two-Way Audio through the mobile app
- Battery heater for low-temperature operation
- 2x2 antenna for improved Wi-Fi range
- Compatible with existing doorbell transformers (requires
16-30 VAC, 10 VA)
- Compatible with mechanical and digital chimes
Included accessories
- Angled mounting wedges
- Power module
- Mounting brackets
- Wire connectors
- Wire extenders
Exclusively for systems powered by Alarm.com
|
ADC-VDB770- Bronze Wi-Fi Next-Generation Video Doorbell Camera Color Options: White, Silver, Bronze IMPORTANT NOTE: Alarm.com Products are Not Standalone Devices. They requires a service subscription from an Authorized Alarm.com Dealer in order to work on a network.
The ADC-VDB770, Alarm.com's next-generation video doorbell
camera and the latest installment in the Design Studio Series product
line, has an expansive 150° vertical Field of View (FOV), allowing you to
monitor the entire doorway area. Two-Way Audio and full portrait viewing in the
app make it easier than ever to see a speak with visitors. Plus,
the ADC-VDB770 uses video analytics to minimize false-positive motion
detection and to enable rapid detection of people, so you receive
alerts even if visitors don't ring the bell.
Requirements:
REQUIRES ALARM.COM SUBSCRIPTION
Features:
- Expansive FOV (150° V, 115° H)
- Full HD (1440 x 1920) video resolution
- High dynamic range (HDR)
- IR night vision
- Video Analytics on the edge for faster, more relevant alerts
- Live video and saved clip viewing
- Two-Way Audio through the mobile app
- Battery heater for low-temperature operation
- 2x2 antenna for improved Wi-Fi range
- Compatible with existing doorbell transformers (requires
16-30 VAC, 10 VA)
- Compatible with mechanical and digital chimes
Included accessories
- Angled mounting wedges
- Power module
- Mounting brackets
- Wire connectors
- Wire extenders
Exclusively for systems powered by Alarm.com
|
ADC-VDB770-Silver Wi-Fi Next-Generation Video Doorbell Camera with Battery Installed Color Options: White, Silver, Bronze IMPORTANT NOTE: Alarm.com Products are Not Standalone Devices. They requires a service subscription from an Authorized Alarm.com Dealer in order to work on a network.
The ADC-VDB770, Alarm.com's next-generation video doorbell
camera and the latest installment in the Design Studio Series product
line, has an expansive 150° vertical Field of View (FOV), allowing you to
monitor the entire doorway area. Two-Way Audio and full portrait viewing in the
app make it easier than ever to see a speak with visitors. Plus,
the ADC-VDB770 uses video analytics to minimize false-positive motion
detection and to enable rapid detection of people, so you receive
alerts even if visitors don't ring the bell.
Requirements:
REQUIRES ALARM.COM SUBSCRIPTION
Features:
- Expansive FOV (150° V, 115° H)
- Full HD (1440 x 1920) video resolution
- High dynamic range (HDR)
- IR night vision
- Video Analytics on the edge for faster, more relevant alerts
- Live video and saved clip viewing
- Two-Way Audio through the mobile app
- Battery heater for low-temperature operation
- 2x2 antenna for improved Wi-Fi range
- Compatible with existing doorbell transformers (requires
16-30 VAC, 10 VA)
- Compatible with mechanical and digital chimes
Included accessories
- Angled mounting wedges
- Power module
- Mounting brackets
- Wire connectors
- Wire extenders
Exclusively for systems powered by Alarm.com
|
|
|
|
|
|
|
|
|
|
|
|
|
ADC-VDB770-White Wi-Fi Next-Generation Video Doorbell Camera Color Options: White, Silver, Bronze IMPORTANT NOTE: Alarm.com Products are Not Standalone Devices. They requires a service subscription from an Authorized Alarm.com Dealer in order to work on a network.
The ADC-VDB770, Alarm.com's next-generation video doorbell
camera and the latest installment in the Design Studio Series product
line, has an expansive 150° vertical Field of View (FOV), allowing you to
monitor the entire doorway area. Two-Way Audio and full portrait viewing in the
app make it easier than ever to see a speak with visitors. Plus,
the ADC-VDB770 uses video analytics to minimize false-positive motion
detection and to enable rapid detection of people, so you receive
alerts even if visitors don't ring the bell.
Requirements:
REQUIRES ALARM.COM SUBSCRIPTION
Features:
- Expansive FOV (150° V, 115° H)
- Full HD (1440 x 1920) video resolution
- High dynamic range (HDR)
- IR night vision
- Video Analytics on the edge for faster, more relevant alerts
- Live video and saved clip viewing
- Two-Way Audio through the mobile app
- Battery heater for low-temperature operation
- 2x2 antenna for improved Wi-Fi range
- Compatible with existing doorbell transformers (requires
16-30 VAC, 10 VA)
- Compatible with mechanical and digital chimes
Included accessories
- Angled mounting wedges
- Power module
- Mounting brackets
- Wire connectors
- Wire extenders
Exclusively for systems powered by Alarm.com
|
The ADC-VDB750. This doorbell offers crystal clear 2MP picture IMPORTANT NOTE: Alarm.com Products are Not Standalone Devices. They requires a service subscription from an Authorized Alarm.com Dealer in order to work on a network. The ADC-VDB750. This doorbell offers crystal clear 2MP
picture and an expansive 165° horizontal and 145° vertical Field of View so
you can see and do more at the front door.
Alarm.com's powerful People Detection and crisp Two-Way Audio help reduce false
notifications while bringing increased awareness and allowing users to
communicate with visitors. Plus - a wide range of operating temperatures
increase install flexibility making this a great choice in any environment.
Features:
- Expansive 165° horizontal and 145° vertical Field of View
ensures customers get a full picture of what's happening at their front door
- Video Analytics with rapid People Detection for faster, more
relevant alerts and fewer false notifications
- Full HD resolution, High Dynamic Range (HDR), and infrared
night vision
- Two-Way Audio
- Compatible with the Alarm.com Smart Chime (W115C)
- 2MP live video and saved clip viewing via the app and
customer website
- Dual antenna (2x2 MIMO) Wi-Fi for improved range (2.4 GHz
and 5 GHz)
Included
accessories
- ADC-VDB750 video doorbell
- ADC-VDB750 wallplate (with pre-assembled set screw and wire
terminal screws)
- Wall anchors (x2) & screws (x2)
- A 22 Ohm 5 Watt flameproof resistor with 5%
tolerance for installations with mechanical chimes, if needed
Exclusively for systems powered by Alarm.com
|
SkyBell HD Wi-Fi Doorbell Camera Alarm.com 1080p Color Night Vision Satin NickelIMPORTANT NOTE: Alarm.com Products are Not Standalone Devices. They requires a service subscription from an Authorized Alarm.com Dealer in order to work on a network.
The Alarm.com Wi-Fi Doorbell Camera is a doorbell with an integrated camera, PIR motion sensor, digital
microphone and speaker, enabling homeowners to answer the door, speak to visitors via two-way audio, record
doorbell triggered clips, and set motion triggered automation rules – all right from their Alarm.com app.
You will always know who is at the front door! With a 1080p camera, motion sensors, color night
vision, real-time alerts and Smart Home automation, the Skybell HD and Alarm.com are helping to create a safer
home.
Requirements:
- REQUIRES ALARM.COM SUBSCRIPTION
- Power: Power: 8-36VAC, 10VA or 12VDC, 0.5 to 1.0A wired to
in-home mechanical chime. Digital doorbell chime compatibility
requires SkyBell Digital Doorbell Adapter - not included.
- Wi-Fi: Compatible with Wi-Fi 802.11 b/g/n, 2.4 GHz up to 150 Mbps.
- Mounting: Mounting plate affixes to flat surface, and utilizes
existing doorbell wiring.
- Mobile Device: Alarm.com App compatible with Apple iOS,
Android. Mobile device not included.
Specifications:
- Video Camera: 1080p/720p resolution, 180° view,
auto-scaling, full-color.
- Night Vision: Full-color night vision.
- Audio: Omni-directional microphone.
- Motion Sensor: Detects motion up to 8’ range
- Battery Life: 3 to 5 years
- Dimensions: 2.8 inches/7.1 cm wide, 0.9 inches/2.2 cm deep,
1.9 ounces/53.8 g weight.
- Environment: Outdoor use, operating temp -40°F/-40°C
to 140°F/60°C, 0-100% condensing, water resistant.
|
|
|
|
|
|
|
|
|
|
|
Alarm.com ADC-VDB780B Wire-Free Battery Power Video Doorbell (VDB780B Only) ADC-VDB780B-W115C-Bundle
IMPORTANT NOTE: Alarm.com Products are Not Standalone Devices. They requires a service subscription from an Authorized Alarm.com Dealer in order to work on a network. The
Alarm.com Wireless Video Doorbell is a battery-powered doorbell camera that
features HD video, Video Analytics for rapid people detection, Two-Way Audio, a
wide field of view, and a rechargeable battery.
This
completely wireless video doorbell gives you the flexibility to choose the
perfect installation location without depending on the existing wiring or
chime. The VDB780B must be connected over Wi-Fi to the Alarm.com Smart Chime
(ADC-W115C). Features:
- Completely
wireless installation
- Rechargeable
(micro USB) battery pack
- Optimized
for battery life that is expected to last up to six months
- Advanced
motion detection provides increased awareness with timely alerts
- Two-Way
Audio through the mobile app
- Installation
flexibility for optimal viewing
- 160º horizontal
FOV
- Full HD
1080p recording
Wi-Fi connection to the Alarm.com Smart Chime
(ADC-W115C) required
Included
accessories
- Charging
cable
- Mounting
plate
- Mounting
screws and anchors
- Installation
guide
- 10º tilt
wedge
Exclusively for systems powered by Alarm.com
|
Alarm.com Wireless Video Doorbell & Wi-Fi Smart Chime Bundle ADC-VDB780B ADC-W115C IMPORTANT NOTE: Alarm.com Products are Not Standalone Devices. They requires a service subscription from an Authorized Alarm.com Dealer in order to work on a network.
The
Alarm.com Wireless Video Doorbell is a battery-powered doorbell camera that
features HD video, Video Analytics for rapid people detection, Two-Way Audio, a
wide field of view, and a rechargeable battery.
This
completely wireless video doorbell gives you the flexibility to choose the
perfect installation location without depending on the existing wiring or
chime. The VDB780B must be connected over Wi-Fi to the Alarm.com Smart Chime
(ADC-W115C). Features:
- Completely
wireless installation
- Rechargeable
(micro USB) battery pack
- Optimized
for battery life that is expected to last up to six months
- Advanced
motion detection provides increased awareness with timely alerts
- Two-Way
Audio through the mobile app
- Installation
flexibility for optimal viewing
- 160º horizontal
FOV
- Full HD
1080p recording
Wi-Fi connection to the Alarm.com Smart Chime
(ADC-W115C) required
Included
accessories
- Charging
cable
- Mounting
plate
- Mounting
screws and anchors
- Installation
guide
- 10º tilt
wedge
Exclusively for systems powered by Alarm.com
|
|