Brands

Information

Email Signup



Join our mailing list!






Home > GoControl > Image Sensor
Sort By:
Page of 2
2GIG: HUSBZ-1 GoControl QuickStick
2GIG: HUSBZ-1 GoControl QuickStick
Our Price: $23.50

2GIG: HUSBZ-1 GoControl QuickStick

  • The Model HUSBZ-1 is a Z-Wave Plus certified USB interface for use in Z-Wave certified residential and small business automation environments.
  • 3rd party software is required for consumer applications.
2GIG: WO15Z-1 Z-Wave Single Wall Outlet
2GIG: WO15Z-1 Z-Wave Single Wall Outlet
Our Price: $28.36

2GIG: WO15Z-1 Z-Wave Single Wall Outlet

  • The WO15Z-1 Single Wall Outlet is wired in place of a standard duplex receptacle.
  • This device allows remote ON/OFF control of loads connected to the bottom outlet (the other outlet remains powered at all times).
Features:
  • Maximum Load:
  • Incandescent: 600W maximum, 120 VAC
  • Resistive: 15 amps (1800 watts) maximum, 120 VAC
  • Motor: 1/2 H.P. maximum, 120 VAC
  • Signal (Frequency): 908.42 MHz
  • Range: Up to 100 feet between the wireless controller and/or the closest Z-Wave device
  • Input: 120v 15A 60Hz
  • Tamper resistant as required by 2008 National Electric Code for new and renovated dwellings
  • Network wide inclusion
  • Scene: Command Class
  • Security beaming
  • Requires a Neutral
2GIG: LB65R6Z-1 Recessed Lighting Retrofit Kit w/ LED Bulb
2GIG: LB65R6Z-1 Recessed Lighting Retrofit Kit w/ LED Bulb
Our Price: $32.20

2GIG: LB65R6Z-1 Recessed Lighting Retrofit Kit w/ LED Bulb

  • The GoControl Bulbz Smart LED Retrofit Recessed Lighting Kit (LB65R6Z-1) fits into 5" or 6" recessed ‘can’ lighting fixtures, replacing old, outdated incandescent screw-in bulbs with clean and attractive, soft-white efficient LED lighting.
  • The LB65R6Z can be controlled wirelessly (On/Off/Dim) when used in conjunction with a Z-Wave controller/hub using the controller’s user interface (e.g. 2GIG GC2), or via a smart phone, tablet app, or PC.
  • Depending on the capability of your controller/hub, once the Smart Retrofit Light has been added to your network, it can be added to a ‘Group’ or ‘Scene’ or change its status via your controller / app’s specific programming.
Features:
  • Built-in Z-Wave: Can be controlled remotely and wirelessly
  • Plug and play, simple setup
  • Ultra-long life and more energy-efficient vs. incandescent or fluorescent lights
  • Instant-on lighting
  • Over-the-Air firmware upgrade available (with compatible gateway, Z-Wave static controller, or PC and software)
  • Uses new, advanced feature 500-Series Z-Wave module
  • Manual reset capability
Specifications:
  • Input power: 120 VAC, 60 Hz.
  • Brightness: 650 lumens
  • Wireless Range: Up to 130 feet line of sight between the controller and other nodes
  • For indoor use only
2GIG: WD500Z-1 Z-Wave Wall Dimmer Switch
2GIG: WD500Z-1 Z-Wave Wall Dimmer Switch
Our Price: $32.55

2GIG: WD500Z-1 Z-Wave Wall Dimmer Switch

  • The WD500Z-1 Wall Mounted Dimmer allows remote ON/OFF control and dimming of connected lights.
  • The Z-Wave Wall Mount Dimmer is easily wired in place of a standard wall dimmer.
  • This device requires a Neutral connection.
Features:
  • Maximum Load: 500 Watts for control of permanently installed lighting fixtures only (Not for control of receptacles)
  • Signal (Frequency): 908.42 MHz
  • Range: Up to 100 feet line of sight between the wireless controller and/or the closest Z-Wave device
  • Input: 120v 15A 60Hz
  • Network wide inclusion
  • Scene: Command class
  • Security beaming
  • Requires a Neutral
  • Auto-Sense feature built-in
  • Replaceable trim ring design
  • Also available in 1000W (Part #WD1000Z-1)
2GIG: WS15Z-1 Z-Wave Wall Switch
2GIG: WS15Z-1 Z-Wave Wall Switch
Our Price: $34.00

Product Discontinued. Please Use WS15Z5-1

2GIG: WS15Z-1 Z-Wave Wall Switch


  • The WS15Z-1 Wall Mount Switch allows remote ON/OFF control of loads connected to the switch, and is easily wired in place of a standard wall switch.
  • The Switch integrates with other Nortek Security & Control Z-Wave enabled products, and can also act as a wireless repeater to ensure that commands intended for another device in the network are received (useful when a device would otherwise be out of radio range).
Replaceable Trim Ring:
  • The WS15Z-1 Wall Mount Switch has a field replaceable trim ring
  • The color of the device can be altered with the Trim Ring Kit model in black, brown and almond.
Features:
  • Maximum Load:
  • Resistive: 15 amps (1800 watts) max., 120 VAC
  • Motor: 1/2 H.P. maximum, 120 VAC
  • Incandescent: 600W maximum, 120 VAC
  • Signal (Frequency): 908.42 MHz, 9.6Kbps or 40Kbps capable
  • Range: Up to 100 feet between the wireless controller and/or the closest Z-Wave device
  • Input: 120v 15A 60Hz
  • Z-Wave Version 4.55
  • Network wide inclusion
  • Scene: Command class
  • Security beaming
  • Requires a Neutral
  • Replaceable trim ring design
  • Technical Bulletin: Z-Wave 3-Way Light Switch Setup

2GIG: WD1000Z-1 Z-Wave Wall Dimmer Switch
2GIG: WD1000Z-1 Z-Wave Wall Dimmer Switch
Our Price: $37.23

2GIG: WD1000Z-1 Z-Wave Wall Dimmer Switch
  • The Wireless Z-Wave wall mount dimmer allows remote ON/OFF control and dimming of connected lights.
  • The smart dimmer switch is easily wired in place of a standard wall dimmer, and requires a Neutral connection.
  • The WD1000Z-1 dimmer has a field replaceable trim ring
  • The color of the device can be altered with the Trim ring kit model in black, brown, and almond.
Features:
  • Maximum Load: 1000 Watts for control of permanently installed lighting fixtures only (Not for control of receptacles)
  • Signal (Frequency): 908.42 MHz
  • Range: Up to 100 feet line of sight between the wireless controller and/or the closest Z-Wave device
  • Input: 120v 15A 60Hz
  • Network wide inclusion
  • Scene: Command Class
  • Security beaming
  • Requires a Neutral connection
  • Auto Sense allows for local lamp activation independent of the Z-Wave controller status
  • Fits in standard J-box
  • Decorator wall plate included
  • Replaceable trim ring design
  • Also available in 500W (Part #WD500Z-1)
  • Technical Bulletin: Z-Wave 3-Way Light Switch Setup
Note to Installers:
  • When installing a Z-Wave 3-Way Light setup utilizing Nortek Security & Control products
  • You will need a Load Bearing switch (WS15Z-1, WD500Z-1 or WD1000Z-1) and a non-load bearing WT00Z-1.
  • Multiple WT00Z-1 switches can be utilized to control multiple Load Bearing devices.
  • Please refer to the linked Technical Bulletin on Z-Wave 3-Way Light Switch Setup for more information.

2GIG: 2GIG-LB60Z-1 Zwave LED Dimmable Light Bulb (Bulb Z)
2GIG: 2GIG-LB60Z-1 Zwave LED Dimmable Light Bulb
Our Price: $39.99

2GIG: 2GIG-LB60Z-1 Zwave LED Dimmable Light Bulb (Bulb Z)

  • The LinearLinc BulbZ is a Z-Wave controllable and fully-dimmable, instant-on LED screw-in light bulb that provides pleasant soft-white illumination.
  • Equivalent to a 60-watt incandescent bulb and usin g only nine (9) watts of energy, BulbZ is estimated to save approximately $140 (USD) throughout its average lifespan.
  • As with all Linear Z-Wave products, BulbZ operates at the standard 908.42 MHz frequency, gives users the convenience of wirelessly controlling lighting from a Z-Wave hub or controller, and lets users program scenes to create comfortable, inviting lighting settings to suit a variety of occasions and moods.
Features:
  • Wirelessly control the bulb from anywhere (requires Z-Wave Apps for iOS or Android)
  • Turn the bulb ON, OFF, or use its dimming features to adjust to 100 levels of brightness
  • Acts as a wireless repeater to extend the Z-Wave mesh network to cover longer distances
  • Integrates with other Z-Wave certified products from Linear and 2GIG by Linear

Specifications:

  • Item Weight: 3.3 oz
  • Product Dimensions (DxH): 2.5 x 4.4 in
  • Shape: A19
  • Z-Wave Chip: 500 series
  • Wireless Range (Line of Sight): 130 ft
  • Z-Wave Repeater: Yes
  • Network Inclusion: Standard & NWI
  • Power Consumption: Nine (9) Watts
  • Max Output: 750 Lumens
  • Equivalent Incandescent Output: 60 Watts
  • Light Output: 2700􀖩 Kelvin
  • Average Lifespan (Based on usage of three (3) hours/day): ~25,000 Hours (~22.8 years)

System Requirements:
  • Go!Control Panel security system or other Z-Wave-certified gateway

2GIG: HUSBZB-1 GoControl QuickStick Combo
2GIG: HUSBZB-1 GoControl QuickStick Combo
Our Price: $39.99

2GIG: HUSBZB-1 GoControl QuickStick Combo
  • The Model HUSBZB-1 is a USB stick that houses both a Z-Wave and Zigbee radio.
  • Designed for OEMs that want to provide dual functionality when being used with a host device.

2GIG: LBR30Z-1 Z-Wave Dimmable LED Indoor Flood Light (BR30 Style)
2GIG: LBR30Z-1 Z-Wave Dimmable LED Indoor Flood Light
Our Price: $54.95

2GIG: LBR30Z-1 Z-Wave Dimmable LED Indoor Flood Light (BR30 Style)

  • The Bulbz indoor flood light (Model LBR30Z-1) is a Z-Wave light bulb that has the characteristics consumers want in a flood light form factor, with the added capability of remote and automation-system control.
  • It’s a great solution for consumers who want to have ’scene’ or remote control capability on their recessed ’can’ lights or track lighting fixtures, without having to mess with any electrical wiring - it’s as simple as screwing in a bulb!
Features:
  • Uses only 7.5 watts of energy and provides as much light as a traditional 65-watt incandescent flood light bulb (650 lumens).
  • Medium-cool 5,000K light appearance (pleasant and cool, providing near-daylight illumination).
  • Perfect for recessed ’can’ (4" or larger) and track light fixtures that use flood lights; for kitchens, bathrooms, family & living rooms, foyers, offices - you name it.
  • Annual energy consumption (@ 3 hrs./day, 11¢/kWh) is only $0.90!
  • Includes wall light switch ’clip’ that will keep the light switch in the ’on’ position to ensure that the Z-Wave circuitry inside the flood light bulb is always active.
  • Dimensions: 3.75" diameter by 5.375" high
2GIG: GD00Z-4 Z-Wave Garage Door Opener Remote Controller Accessory
2GIG: GD00Z-4 Z-Wave Garage Door Opener Remote Controller Accessory
Our Price: $99.99

2GIG: GD00Z-4 Z-Wave Garage Door Opener Remote Controller Accessory

  • The Garage Door Remote Controller Accessory opens or closes a sectional garage door remotely through a Z-Wave certified Gateway or Security Panel.
  • It is compatible with virtually any automatic garage door opener connected to a sectional garage door.
Specifications:
  • Power: 120VAC, 50/60 Hz
  • Garage door position sensor frequency: 345 MHz
  • Z-Wave Frequency: 908.42 MHz
Z-Wave Specifications:
  • Range: Up to 100 feet between the wireless controller and/or the closest Z-Wave receiver module
  • Network wide inclusion
  • Scene: Command class
  • Security compatible
Certifications:
  • FCC
  • ETL
  • UL 325
Included Accessories:
  • Power supply 120VAC / 60Hz to 12VDC
  • Garage door tilt sensor
  • Mounting bracket and hardware