Email Signup

Join our mailing list!

Home > GoControl > Smart Lighting & Appliance Control
Sort By:
Page of 1
2GIG: WA00Z-1 GoControl Smart Wireless Light Switch 2GIG: WT00Z-1 Z-Wave 3-Way Wall Accessory Switch GoControl Z-Wave Plug-in Dimmer Module
2GIG: WA00Z-1 GoControl Smart Wireless Light Switch

  • The Model WA00Z-1 is a Smart Switch Cover with Z-Wave radio.
  • Built-in Z-Wave radio – can control Z-Wave Light Bulb and switches/dimmers remotely and wirelessly
  • Plug and play, simple setup. Fits over an existing wall switch.
  • Manually turn on, off, dim your lights while keeping the smart light bulb always online in your home network
  • Works with different types and brands of Z-Wave LED Light control devices
  • Powered by Z-Wave® 500 Series module inside
  • Manual reset capability
  • Powered by 2 pieces of standard CR2032 Lithium Coin Cell with long battery life

Product Discontinued. Please Use WT00Z5-1

2GIG: WT00Z-1 Z-Wave 3-Way Wall Accessory Switch

  • The WT00Z-1 Wall Mount Accessory Dimmer Switch allows remote ON/OFF control and dimming of lights controlled by associated Z-Wave modules, creating virtual 3-way switches.
  • The WT00Z-1 controls no load directly, so it can be wired anywhere power is available, without the need for a traveler wire.
Replaceable Trim Ring:
  • The WT00Z-1 3-Way Wall Mount Accessory Dimmer/Switch has a field replaceable trim ring
  • The color of the device can be altered with the Trim Ring Kit model in black, brown and almond.
  • Signal (Frequency): 908.42 MHz
  • Load: does not directly control a load. Another Z-Wave device is required.
  • Range: Up to 100 feet line of sight between the controller and/or the closest Z-Wave device
  • Network-wide inclusion
  • Connect up to 5 devices to create virtual 3,4,5,6,7-way operation
  • Requires Minimote
  • Security beaming
  • Technical Bulletin: Z-Wave 3-Way Light Switch Setup
The PD300Z-2 Plug-in Lamp Module is designed to provide Z-Wave control to a connected dimmable lamp. The PD300Z-2 module is plugged into any standard grounded AC wall outlet, and the lamp is then plugged into the module. Once connected, the lamp can be dimmed or turned on or off remotely via the Z-Wave controller. The module contains two power receptacles - one controlled, and one pass-through (powered at all times).

This Plug-in Lamp Module integrates with other Nortek Security & Control Z-Wave enabled products, and can also act as a wireless repeater to ensure that commands intended for another device in the network are received (useful when a device would otherwise be out of radio range).


Unique to Nortek Security & Control, the Auto-Sense feature allows for local lamp activation independent of the Z-Wave controller status. With AutoSense, one can simply switch the connected lamp's manual switch off, then on, and AutoSense will instruct the PD300Z-2 to turn the lamp on.


  • Signal (Frequency): 908.42 MHz
  • Maximum Load:
    Incandescent: 300W maximum, 120 VAC
  • Range: Up to 100 feet line of sight between the wireless controller and/or the closest Z-Wave device
  • Network wide inclusion
  • One controlled and one pass-through outlet
  • Security beaming


  • 120 VAC, 60 Hz