|
|
|
|
|
|
2GIG: 2GIG--LPM15 Z-Wave Plug In Appliance Module
|
|
|
2GIG: 2GIG--LPM15 Z-Wave Plug In Appliance Module
Info:
- The LPM-15 plug-in Appliance Module is a component of the Evolve lighting control system.
- Plug
the Appliance Module into a wall outlet and plug a load into the Appliance Module.
- Inclusion of the
LDM-15 Lamp Module allows remote ON/OFF control and dimming of appliances connected.
- As part of the Z-Wave network, the LPM-15 will act as a wireless repeater to insure that
commands intended for another device in the network are received.
- This is useful when the
device would otherwise be out of the radio range.
Features:- Provides wireless ON/OFF control of lamps and appliances
- Plugs directly into wall outlet and provides a switched 120 VAC source.
- Includes pass through plug.
- Supports load sensing so load is automatically turned on if the attached light is turned on manually. (load should be at least 25 watts for this feature to work)
- Soap bar Style
- Supports Z-Wave 40Kbps speeds
- Resistive Loads: 15 amps (1800 watts) maximum, 120 VAC
- Each Plug-In Appliance Module functions as automatic repeater to other Z-Wave Modules to ensure full home coverage.
- Signal (Frequency): 908.42 MHz
- Range: Up to 100 feet line of sight between the Wireless Controller and /or the closest HomePro Module
- Z-Wave Version 4.52
- Network Inclusion
- Scene - Command Class
- Security Compatible
|
|
|
|
|
|
|
|
|
|
|
Z-Wave Wall Mount Light Switch WS15Z-1 LRM
|
|
|
Z-Wave Wall Mount Light Switch WS15Z-1
|
|
|
|
|
|
|
|
|
|
2GIG: 2GIG-LB60Z-1 Zwave LED Dimmable Light Bulb
|
|
|
2GIG: 2GIG-LB60Z-1 Zwave LED Dimmable Light Bulb (Bulb Z)
- The LinearLinc BulbZ is a Z-Wave controllable and fully-dimmable, instant-on LED screw-in light bulb that provides pleasant soft-white illumination.
- Equivalent to a 60-watt incandescent bulb and usin g only nine (9) watts of energy, BulbZ is estimated to save approximately $140 (USD) throughout its average lifespan.
- As with all Linear Z-Wave products, BulbZ operates at the standard 908.42 MHz frequency, gives users the convenience of wirelessly controlling lighting from a Z-Wave hub or controller, and lets users program scenes to create comfortable, inviting lighting settings to suit a variety of occasions and moods.
Features:- Wirelessly control the bulb from anywhere (requires Z-Wave Apps for iOS or Android)
- Turn the bulb ON, OFF, or use its dimming features to adjust to 100 levels of brightness
- Acts as a wireless repeater to extend the Z-Wave mesh network to cover longer distances
- Integrates with other Z-Wave certified products from Linear and 2GIG by Linear
Specifications:
- Item Weight: 3.3 oz
- Product Dimensions (DxH): 2.5 x 4.4 in
- Shape: A19
- Z-Wave Chip: 500 series
- Wireless Range (Line of Sight): 130 ft
- Z-Wave Repeater: Yes
- Network Inclusion: Standard & NWI
- Power Consumption: Nine (9) Watts
- Max Output: 750 Lumens
- Equivalent Incandescent Output: 60 Watts
- Light Output: 2700 Kelvin
- Average Lifespan (Based on usage of three (3) hours/day): ~25,000 Hours (~22.8 years)
System Requirements:
- Go!Control Panel security system or other Z-Wave-certified gateway
|
|
|
|
|
|
|
|
|
|
GoControl Z-Wave Door/Window Sensor
|
|
|
The WADWAZ-1 wireless Z-Wave door or window sensor is a two-piece sensor designed to be affixed to a door, window, or other permanent fixture that opens and closes, such as a drawer, safe, or valuables storage cabinet. Once paired with a compatible Z-Wave controller or hub, the sensor will report when the fixture has been opened or closed via wireless Z-Wave transmission.
FEATURES:- Maximum sensor gap: 0.75"
- Internal reed switch
- External switch support
- For non-life safety applications
- 100’ line-of-sight range
- Anti-tamper design
- Up to 5 associations
|
|
|
|
|
|
|
|
|
|
GoControl Smart Water Leak Sensor Z-WAVE
|
|
|
The Model WF00Z-1 is a Z-Wave water presence detector-sensor with remote antenna, AC-powered.
|
|
|
|
|
|
|
|
|
|
GoControl QuickStick
|
|
|
The Model HUSBZ-1 is a Z-Wave Plus certified USB interface for use in Z-Wave certified residential and small business automation environments. 3rd party software is required for consumer applications. |
|
|
|
|
|
|
|
|
|
GoControl GB00Z-2 Smart Glass Break Detector Z-Wave
|
|
|
The GoControl Glass Break Sensor GB00Z-2
offers superior monitoring of glass windows or doors and alerts the homeowner when a break has been detected. Unlike other ‘shock’ - type detectors, which can only be affixed to one single pane of glass, the GoControl Glass Break Sensor can be easily mounted on the wall or ceiling and monitor multiple windows or glass doors within a 12-foot radius of the sensor. Advanced two-stage "thump & crash" detection technology uses acoustic monitoring and analysis to significantly reduce false alarms. The GoControl Glass Break Sensor effortlessly integrates with any Z-Wave hub, app, and other devices to alert homeowners when a glass break event has occurred.
Features:
- Always ready detection
- Spatial detection of window shattering sounds
- Long-life battery included
- Z-wave communications test button
|
|
|
|
|
|
|
|
|
|
2GIG Z-Wave Wall Mount Dimmer WD500Z-1
|
|
|
The WD500Z-1 Wall Mounted Dimmer allows remote ON/OFF control and dimming of connected lights. The Z-Wave Wall Mount Dimmer is easily wired in place of a standard wall dimmer. This device requires a Neutral connection.
Specifications- Maximum Load: 500 Watts for control of permanently installed lighting fixtures only (Not for control of receptacles)
- Signal (Frequency): 908.42 MHz
- Range: Up to 100 feet line of sight between the wireless controller and/or the closest Z-Wave device
- Input: 120v 15A 60Hz
- Network wide inclusion
- Scene: Command class
- Security beaming
- Requires a Neutral
- Auto-Sense feature built-in
- Replaceable trim ring design
- Also available in 1000W (Part #WD1000Z-1)
|
|
|
|
|
|
|
|
|
|
Z-Wave 3-Way Wall Mount Dimmer/Switch WT00Z-1
|
|
|
Z-Wave 3-Way Wall Mount Dimmer/Switch WT00Z-1
|
|
|
|
|
|
|
|
|
|
2GIG Z Wave Plug-in Dimmer Lamp Module
|
|
|
Z Wave Plug-in Dimmer Lamp Module
|
|
|
|
