Email Signup

Join our mailing list!

  Home > 2GIG by Linear > Z-Wave Automation and Accessories >

2GIG: 2GIG-PD300Z-2 Z-Wave Plug-In Dimmer Lamp Module
2GIG: 2GIG-PD300Z-2 Z-Wave Plug-In Dimmer Lamp Module

Our Price: $31.90

Quantity in Stock:25
Product Code: 2GIG-Z-LDM-PD300Z-2

2GIG: 2GIG-PD300Z-2 Z-Wave Plug-In Dimmer Lamp Module

  • The Plug-in Lamp Module is designed to provide Z-Wave control to a connected dimmable lamp.
  • The PD300Z-2 module is plugged into any standard grounded AC wall outlet, and the lamp is then plugged into the module.
  • Once connected, the lamp can be dimmed or turned on or off remotely via the Z-Wave controller.
  • The module contains two power receptacles – one controlled, and one pass-through (powered at all times).
  • This Plug-in Lamp Module integrates with other Nortek Security & Control Z-Wave enabled products, and can also act as a wireless repeater to ensure that commands intended for another device in the network are received (useful when a device would otherwise be out of radio range).


  • Unique to Nortek Security & Control, the Auto-Sense feature allows for local lamp activation independent of the Z-Wave controller status.
  • With AutoSense, one can simply switch the connected lamp’s manual switch off, then on, and AutoSense will instruct the PD300Z-2 to turn the lamp on.


  • Signal (Frequency): 908.42 MHz
  • Maximum Load:
    • Incandescent: 300W maximum, 120 VAC
  • Range: Up to 100 feet line of sight between the wireless controller and/or the closest Z-Wave device
  • Network wide inclusion
  • One controlled and one pass-through outlet
  • Security beaming
  • Power Requirements
  • 120 VAC, 60 Hz

Share your knowledge of this product. Be the first to write a review »